Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Deutsch |Pусский |
| No.13693755
- Product Categories
- Friendly Links
Information Name: | Beijing factory direct CGM-100 non-shrink epoxy grout (water emulsion) |
Published: | 2015-04-13 |
Validity: | 30 |
Specifications: | 5 + 15 + 150 kg / group |
Quantity: | 1000.00 |
Price Description: | |
Detailed Product Description: | CGM-100 non-shrink epoxy grout factory direct Tel: 18701680253 Kongqing Yao QQ: 454964868 ★ Features 1, high strength early strength: physical and mechanical properties of compression, bonding and other far superior to ordinary cement-based grout. 2, gravity sex: You can fill all the gaps and meet the requirements of secondary grouting equipment. 3, no shrinkage: to ensure close contact between the equipment and infrastructure to ensure the precision required for installation. 4, water and milk-based epoxy cement: epoxy resin with high quality cement joint action, durability and meet environmental protection requirements. 5, corrosion resistance: can withstand acid, alkali, salt, oil and other chemicals, long-term exposure to corrosion. 6, creep resistance: long-term use without plastic deformation in bad physical condition, to ensure the long-term precision positioning equipment. 7, can be used in wet grass roots, strong bond. ★ Uses one for secondary grouting install compressors, pumps, punching machine, grinder, ball mill, high vibration of the device. 2, for the vulnerable to chemical attack of equipment foundation grouting area. 3, for the rail infrastructure, such as bridges supporting base area by the strong pressure grouting. 4, for the anchor implantation and structural steel reinforcement concrete building. ★ performance range test report test results a fluidity (mm) 275 2 vertical expansion rate (%) ≥0.02 3 28d flexural strength (Mpa) 5 ~ 10 4 28d of neutral low resistance (mm) <5.0 5 Compressive strength (Mpa) 3d 20 ~ 30 6 7d 40 ~ 50 7 28d 75 ~ 90 8 steel bond strength (Mpa) round steel ≥13 ≥6 9 Note: 1, compressive strength: According to "GB177-85 cement mortar strength test method. " 2, the expansion rate: According to "GB119-88 concrete admixture technical specifications." 3. Reference dosage recommendation: 2000kg / m3 ★ a construction technology, surface pretreatment contact CGM-100 non-shrink epoxy grout concrete surface shall be chiseled surface laitance and expose solid grassroots level, to ensure that grout surface clean and dry free of grease. Concrete joints grind 25mm thick outer edge chamfered edges to increase the edge of the grout and adhesive base area; required bonding metal surfaces should be no rust (up sspc-sp6 finish requirements). Second, the template should be solid formwork, lap firm, its inside smear grease, wax or paste pvc tape in order to release; in order to facilitate the dumping and installed more than 100mm. Filling the inside of the template on the level of the 45-degree bevel nail 25mm thick moldings, avoid placing the body edge stress concentration. Third, the construction including concrete foundation explain the ambient temperature and air temperature. To get the best working conditions, and the subsequent construction within 24 hours at ambient temperature is best controlled 15 ℃ ~ 32 ℃, 20 ℃ most appropriate. Summer construction to avoid the midday heat, when necessary, to build awnings; winter when the temperature is low, you should build greenhouses heated in filling area, to ensure the construction environment temperature is higher than 15 ℃, the construction should choose noon. Fourth, an ingredient used to mention stirrer (200-250rpm) first A material, B material stir respectively (long-term placement precipitation phenomenon), and then follow A material: B material = 1: 3 ratio of mixing homogeneous mixture was stirred for about 3 minutes. 2, in the low-speed high-power mixer (15-20rpm) in accordance with A: B: C = 1: 3: 30 ratio of added C material, so that the material A, B material, C material fully mixed, the mixing time is about 5 10 minutes, at low temperatures in order to ensure the flow of the mixture may be appropriate to reduce the amount of C material or appropriate to add water and mix well. Fifth, filling method, grout should be on one side to the other side of the sink; grouting process can squeeze shock but do not stir to avoid air entrapment inclusion therein; grouting distance is greater than 1.5m, you should use a high filling funnel method, using gravity Principle auxiliary pressure grouting. 2, grout work must be completed as soon as possible in a row. 3, a single filling layer thickness control in between 25mm ~ 350mm; single bolt hole filling depth is less than 1500mm; when filling volume than 1.8m × 1.8m × 150mm, need to wipe board on the basis of surface grab Sticky joints reserved Article grout after final setting its surface is partially removed, and then sealed material joints. ★ A Packing material: Standard Packing for 5kg / barrel, should be stored in a cool than 5 ℃ sealed condition, the shelf life of six months. B material: standard packaging specifications 15kg / barrel, should be stored in a cool, down more than 5 ℃ sealed, shelf life of six months. C material: Standard Packing for 150kg / bag, should be stored in a dry environment moisture, unopened shelf life of six months. Note: 1, the weight ratio: A: B: C = 1: 3: 30, n = Weight 170kg 2, non-flammable, non-explosive, non-polluting and non-radiological hazards, according to general cargo storage and transportation. ★ solemnly declare that this product beyond the control of the manufacturer, the Company does not assume any liability arising as a result of improper use, please refer to this manual when using related questions, please contact your local dealership or our technical service department. |
Admin>>>
You are the 12360 visitor
Copyright © GuangDong ICP No. 10089450, Beijing Jiahe Tiancheng Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 12360 visitor
Copyright © GuangDong ICP No. 10089450, Beijing Jiahe Tiancheng Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility